Made to order — 3 to 5 week lead time
Extreema® sling protection is manufactured to order by Lift-Tex and is not held in stock. Plan on 3–5 weeks from order to shipment.
The Extreema® EXCP Corner Protector is a Dyneema® pad that sits between the sling and the edge of the load. Unlike a sleeve, which travels with the sling and guards the sling body, EXCP guards the edge or corner of the load itself as well as the sling passing over it, spreading the bearing area so a hard edge cannot bite into either one.
Dyneema® (HMPE) gives the pad very high cut and abrasion resistance at low weight, so a rigger can place and reposition it by hand rather than wrestling a heavy pad into position.
EXCP is supplied as a finished pad, sold per piece at a fixed length. Each size is a set width, length and thickness — select the size that fully covers the contact area where the sling crosses the edge. The Size selector uses Lift-Tex's own part numbers, in which the first number is the pad width in millimetres and the second is the pad length.
Fitment — corner protector size by sling
Pick the pad whose width covers the full bearing width of the sling where it crosses the edge. Where a sling is wider than the pad, step up a size or use two pads side by side.
| Corner protector | Width | Standard Round Slings (RoundUp® ENR / EER) | SuperTechlon® | Extreema® XS | Flat Web Slings |
|---|---|---|---|---|---|
| EXCP/85/500 | 85 mm | ENR1 EER1 ENR2 EER2 ENR3 EER3 ENR4 EER4 ENR5 EER5 ENR6 EER6 |
ST-ENR-3K ST-ENR-6K ST-ENR-9K ST-ENR-12K ST-ENR-15K ST-ENR-18K |
EXS9 EXS15 EXS30 EXS46 EXS61 |
1 in (30 mm) 2 in (60 mm) |
| EXCP/115/500 | 115 mm | ENR7 EER7 ENR8 EER8 ENR9 |
ST-ENR-24K | — | 3 in (90 mm) |
| EXCP/135/500 | 135 mm | ENR10 ENR11 |
ST-ENR-30K | — | 4 in (120 mm) |
| EXCP/160/500 | 160 mm | ENR12 ENR13 |
— | — | 5 in (150 mm) |
| EXCP/190/600 | 190 mm | — | — | — | 6 in (180 mm) |
| EXCP/230/1000 | 230 mm | — | — | — | — |
| EXCP/260/1000 | 260 mm | — | — | — | 8 in (240 mm) |
| EXCP/290/1000 | 290 mm | — | — | — | — |
Eye & Eye RoundUp® (EER) slings use the same body as the matching endless size, so EER{n} takes the same corner protector as ENR{n}. EER is listed in EER1 through EER8; above that, use the ENR row.
10 in and 12 in webbing falls outside Lift-Tex's published EXCP range. Ask us and we will quote a corner protector for it.
Note the SuperTechlon® ST-ENR-30K: it calls for the 135 mm pad rather than the 115 mm one. It carries more capacity per unit of body size than a comparable European polyester round sling, so a capacity-based lookup understates its girth.
ENR11, ENR12 and ENR13 are quoted to order and are not stocked as web listings.
Corner protectors are protection only. They carry no working load limit of their own and do not change the rating of the sling or hardware used with them.
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Pad sizes — EXCP
Part numbers read EXCP / width in mm / length in mm. Each pad is supplied finished, per piece, at the fixed length shown.
| Part no. | Width (mm) | Width (in) | Length (mm) | Length (in) |
|---|---|---|---|---|
| EXCP/85/500 | 85 mm | 3.3 in | 500 mm | 19.7 in |
| EXCP/115/500 | 115 mm | 4.5 in | 500 mm | 19.7 in |
| EXCP/135/500 | 135 mm | 5.3 in | 500 mm | 19.7 in |
| EXCP/160/500 | 160 mm | 6.3 in | 500 mm | 19.7 in |
| EXCP/190/600 | 190 mm | 7.5 in | 600 mm | 23.6 in |
| EXCP/230/1000 | 230 mm | 9.1 in | 1000 mm | 39.4 in |
| EXCP/260/1000 | 260 mm | 10.2 in | 1000 mm | 39.4 in |
| EXCP/290/1000 | 290 mm | 11.4 in | 1000 mm | 39.4 in |
Fitment — corner protector size by sling
Pick the pad whose width covers the full bearing width of the sling where it crosses the edge. Where a sling is wider than the pad, step up a size or use two pads side by side.
| Corner protector | Width | Standard Round Slings (RoundUp® ENR / EER) | SuperTechlon® | Extreema® XS | Flat Web Slings |
|---|---|---|---|---|---|
| EXCP/85/500 | 85 mm | ENR1 EER1 ENR2 EER2 ENR3 EER3 ENR4 EER4 ENR5 EER5 ENR6 EER6 | ST-ENR-3K ST-ENR-6K ST-ENR-9K ST-ENR-12K ST-ENR-15K ST-ENR-18K | EXS9 EXS15 EXS30 EXS46 EXS61 | 1 in (30 mm) 2 in (60 mm) |
| EXCP/115/500 | 115 mm | ENR7 EER7 ENR8 EER8 ENR9 | ST-ENR-24K | — | 3 in (90 mm) |
| EXCP/135/500 | 135 mm | ENR10 ENR11 | ST-ENR-30K | — | 4 in (120 mm) |
| EXCP/160/500 | 160 mm | ENR12 ENR13 | — | — | 5 in (150 mm) |
| EXCP/190/600 | 190 mm | — | — | — | 6 in (180 mm) |
| EXCP/230/1000 | 230 mm | — | — | — | — |
| EXCP/260/1000 | 260 mm | — | — | — | 8 in (240 mm) |
| EXCP/290/1000 | 290 mm | — | — | — | — |
Eye & Eye RoundUp® (EER) slings use the same body as the matching endless size, so EER{n} takes the same corner protector as ENR{n}. EER is listed in EER1 through EER8; above that, use the ENR row.
10 in and 12 in webbing falls outside Lift-Tex's published EXCP range. Ask us and we will quote a corner protector for it.
Note the SuperTechlon® ST-ENR-30K: it calls for the 135 mm pad rather than the 115 mm one. It carries more capacity per unit of body size than a comparable European polyester round sling, so a capacity-based lookup understates its girth.
ENR11, ENR12 and ENR13 are quoted to order and are not stocked as web listings.
Construction & options
| Material | Dyneema® (HMPE) |
| Protects | The edge or corner of the load, and the sling passing over it |
| Widths available | 85 mm to 290 mm (3.3 in to 11.4 in) |
| Lengths available | Fixed per size — 500 mm (19.7 in), 600 mm (23.6 in) or 1000 mm (39.4 in) |
| Sold as | Per piece |
| Lead time | Made to order, 3 to 5 weeks |
| Working load limit | None — see note below |
The corner protector carries no working load limit. EXCP is protection only. It does not change the rating of the sling or the hardware it is used with, and it must never be treated as a load-bearing component.
Order Sheet — 8 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|
| EXCP/85/500 | EXCP/85/500 | $323.98 | ✓ In Stock | ||
| EXCP/115/500 | EXCP/115/500 | $457.38 | ✓ In Stock | ||
| EXCP/135/500 | EXCP/135/500 | $537.42 | ✓ In Stock | ||
| EXCP/160/500 | EXCP/160/500 | $609.82 | ✓ In Stock | ||
| EXCP/190/600 | EXCP/190/600 | $1,455.96 | ✓ In Stock | ||
| EXCP/230/1000 | EXCP/230/1000 | $1,577.94 | ✓ In Stock | ||
| EXCP/260/1000 | EXCP/260/1000 | $1,768.50 | ✓ In Stock | ||
| EXCP/290/1000 | EXCP/290/1000 | $1,936.20 | ✓ In Stock |
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate