Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.

| Size | Rating basis | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | C (in)(mm) | D (in)(mm) | Max after swage (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|
| 5/16 (8 mm) | 94% efficiency | 0.170.077 | 1.2531.8 | 1.0626.9 | 0.8120.6 | 0.194.85 | 0.7719.6 | 1039334 |
| 3/8 (9-10 mm) | 94% efficiency | 0.130.059 | 1.2531.8 | 1.1228.4 | 0.8120.6 | 0.143.55 | 0.7719.6 | 1039352 |
| 7/16 (11 mm) | 94% efficiency | 0.310.141 | 1.6341.4 | 1.4135.8 | 1.0225.9 | 0.194.85 | 1.0326.2 | 1039370 |
| 1/2 (13 mm) | 94% efficiency | 0.270.122 | 1.6341.4 | 1.4436.6 | 1.0225.9 | 0.164.05 | 1.0326.2 | 1039398 |
| 9/16 (14 mm) | 94% efficiency | 0.630.286 | 2.2557.0 | 1.7243.7 | 1.2331.2 | 0.235.85 | 1.2932.8 | 1039414 |
| 5/8 (16 mm) | 94% efficiency | 0.540.245 | 2.2557.0 | 1.8446.7 | 1.2832.5 | 0.25.1 | 1.2932.8 | 1039432 |
| 3/4 (18-20 mm) | 94% efficiency | 0.910.413 | 2.6367.0 | 2.1655.0 | 1.5238.6 | 0.235.85 | 1.5539.4 | 1039450 |
| 7/8 (22 mm) | 94% efficiency | 1.260.57 | 2.8873.0 | 2.563.5 | 1.7544.5 | 0.276.85 | 1.845.7 | 1039478 |
| 1 (25-26 mm) | 94% efficiency | 1.870.85 | 3.0677.5 | 2.8472.0 | 2.051.0 | 0.338.4 | 2.0552.0 | 1039496 |
This fitting does not carry a Working Load Limit of its own — it is rated by the efficiency of the termination it forms with the rope, so the governing figure is a percentage of the rope’s breaking strength. Size the assembly from the rope, not from the fitting. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby S-506 COLD TUFF® Duplex Non-Tapered Sleeve (also searched as S506, Crosby duplex sleeve, turnback sleeve) is a steel sleeve for turnback wire rope splicing. Turnback terminations have an efficiency rating of 94% based on the catalog strength of the wire rope. Sizes cover 5/16" through 1" rope.
Key Features
- For turnback wire rope splicing
- Special processed low carbon steel
- Turnback terminations have an efficiency rating of 94% based on the catalog strength of wire rope
- COLD TUFF® for better swageability and low temperature toughness
- Resists cracking when swaged (equals or exceeds stainless steel sleeves)
- Can be stamped for identification after swaging without concern for fractures (per the Crosby Wire Rope End Termination User's Manual)
Specifications
- Material: special processed low carbon steel
- Type: duplex, non-tapered
- Efficiency: 94% of the catalog strength of wire rope
- Wire rope size range: 5/16" to 1"
- Recommended rope: 6 x 19 or 6 x 37, IPS or XIP (EIP), RRL, FC or IWRC
Common Applications
- Turnback eye terminations on wire rope
- Wire rope assemblies where a turnback eye is used
- Field and shop swaged rope eyes
Standards & Compliance
- Fittings are designed only to be used on exact sizes listed
- Before use with any other type lay, construction or grade of wire rope, Crosby recommends the termination be destructive tested and documented
Crosby stock numbers: 1039334, 1039352, 1039370, 1039398, 1039414, 1039432, 1039450, 1039478, 1039496
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 9 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 5/16" | 1039334 | $6.67 | 0.17 lb | ✓ In Stock | ||
| 3/8" | 1039352 | $6.67 | 0.13 lb | ✓ In Stock | ||
| 7/16" | 1039370 | $11.33 | 0.31 lb | ✓ In Stock | ||
| 1/2" | 1039398 | $11.38 | 0.27 lb | ✓ In Stock | ||
| 9/16" | 1039414 | $18.42 | 0.63 lb | ✓ In Stock | ||
| 5/8" | 1039432 | $24.02 | 0.54 lb | ✓ In Stock | ||
| 3/4" | 1039450 | $27.40 | 0.91 lb | ✓ In Stock | ||
| 7/8" | 1039478 | $35.55 | 1.26 lb | ✓ In Stock | ||
| 1" | 1039496 | $49.30 | 2.05 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

