Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Type the load and we will highlight every size rated for it. Or click any row to pick that size.
Manufacturer’s wording: “Efficiency rated: 87% to 96% by size and core”

| Size | Rating basis | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | D (in)(mm) | E (in)(mm) | G (in)(mm) | Max after swage (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|
| 1/4 (6-7 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.050.036 | 1.025.4 | 0.6616.8 | 0.317.88 | 0.287.12 | 0.4711.9 | 0.5714.5 | 1041063 |
| 5/16 (8 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.140.0408 | 1.538.1 | 0.9123.1 | 0.4411.2 | 0.4411.2 | 0.6215.8 | 0.7519.1 | 1041090 |
| 3/8 (9-10 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.140.0544 | 1.538.1 | 0.9123.1 | 0.4711.9 | 0.399.91 | 0.6616.8 | 0.7519.1 | 1041107 |
| 7/16 (11 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.330.136 | 2.051.0 | 1.2231.0 | 0.5514.0 | 0.6516.5 | 0.8521.6 | 1.0125.7 | 1041125 |
| 1/2 (13 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.290.132 | 2.051.0 | 1.2231.0 | 0.6316.0 | 0.5614.2 | 0.9123.1 | 1.0125.7 | 1041143 |
| 9/16 (14 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.640.308 | 2.7570.0 | 1.4737.3 | 0.6917.5 | 0.6316.0 | 1.0326.2 | 1.2431.5 | 1041161 |
| 5/8 (16 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.560.259 | 2.7570.0 | 1.4737.3 | 0.7519.1 | 0.6316.0 | 1.0927.7 | 1.2431.5 | 1041189 |
| 3/4 (18-19 mm) | 96% (IWRC) / 93% (FC) efficiency | 0.880.4 | 3.1981.0 | 1.7243.7 | 0.9123.1 | 0.8421.3 | 1.2832.5 | 1.4637.1 | 1041205 |
| 7/8 (22 mm) | 96% (IWRC) / 93% (FC) efficiency | 1.310.62 | 3.5690.5 | 2.0351.5 | 1.0326.2 | 1.025.4 | 1.5338.9 | 1.6842.7 | 1041223 |
| 1 (25-26 mm) | 96% (IWRC) / 93% (FC) efficiency | 1.950.89 | 4.0102.0 | 2.2858.0 | 1.1629.5 | 1.1328.6 | 1.7243.7 | 1.9349.0 | 1041241 |
| 1-1/8 (28-29 mm) | 92% (IWRC) / 89% (FC) efficiency | 2.61.18 | 4.81122.0 | 2.563.5 | 1.2832.5 | 1.2531.8 | 1.9449.3 | 2.1354.1 | 1041269 |
| 1-1/4 (31-32 mm) | 92% (IWRC) / 89% (FC) efficiency | 3.551.54 | 5.19132.0 | 2.7870.5 | 1.4436.5 | 1.4135.8 | 2.1655.0 | 2.3258.9 | 1041287 |
| 1-3/8 (34-35 mm) | 92% (IWRC) / 89% (FC) efficiency | 4.231.95 | 5.81148.0 | 3.076.0 | 1.5639.7 | 1.5639.7 | 2.3860.5 | 2.5264.0 | 1041303 |
| 1-1/2 (37-38 mm) | 92% (IWRC) / 89% (FC) efficiency | 4.992.26 | 6.25159.0 | 3.2582.5 | 1.6942.9 | 1.6942.9 | 2.6367.0 | 2.7169.0 | 1041321 |
| 1-3/4 (44-45 mm) | 92% (IWRC) / 89% (FC) efficiency | 8.053.67 | 7.25184.0 | 3.8497.5 | 1.9449.2 | 1.9750.0 | 3.1379.5 | 3.178.7 | 1041349 |
| 2 (50-52 mm) | 92% (IWRC) / 89% (FC) efficiency | 11.325.1 | 8.5216.0 | 4.38111.0 | 2.2557.0 | 2.2557.0 | 3.6392.0 | 3.5690.4 | 1041367 |
| 2-1/4 (56-57 mm) | 90% (IWRC) / 87% (FC) efficiency | 19.368.62 | 9.56243.0 | 5.03128.0 | 2.563.5 | 2.5364.5 | 4.03102.0 | 4.12105.0 | 1041385 |
| 2-1/2 (62-64 mm) | 90% (IWRC) / 87% (FC) efficiency | 23.5210.43 | 10.5267.0 | 5.5140.0 | 2.7570.0 | 2.8171.5 | 4.5114.0 | 4.5114.0 | 1041401 |
| 2-3/4 (68-70 mm) | 90% (IWRC) / 87% (FC) efficiency | 28.012.7 | 11.5292.0 | 5.75146.0 | 3.076.0 | 3.0978.5 | 4.75121.0 | 4.7119.0 | 1041429 |
| 3 (75-76 mm) | 90% (IWRC) / 87% (FC) efficiency | 29.413.34 | 12.0305.0 | 6.0152.0 | 3.2582.5 | 3.3886.0 | 5.0127.0 | 4.96126.0 | 1041447 |
| 3-1/2 (87-89 mm) | 90% (IWRC) / 87% (FC) efficiency | 46.421.05 | 14.0356.0 | 7.0178.0 | 3.8898.5 | 3.94100.0 | 5.84148.0 | 5.77147.0 | 1041483 |
| 3-3/4 (93-95 mm) | 90% (IWRC) / 87% (FC) efficiency | 55.024.95 | 15.0381.0 | 7.5191.0 | 4.06103.0 | 4.25108.0 | 6.31160.0 | 6.23158.0 | 1041492 |
| 4 (100-105 mm) | 90% (IWRC) / 87% (FC) efficiency | 68.031.3 | 16.0406.0 | 8.13206.0 | 4.38111.0 | 4.5114.0 | 6.81173.0 | 6.69170.0 | 1041508 |
This fitting does not carry a Working Load Limit of its own — it is rated by the efficiency of the termination it forms with the rope, so the governing figure is a percentage of the rope’s breaking strength. Size the assembly from the rope, not from the fitting. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby S-505 COLD TUFF® Standard Steel Sleeve (also searched as S505, Crosby swage sleeve, Flemish eye sleeve) is a swaging sleeve for Flemish eye wire rope splicing, made from special processed low carbon steel. Termination efficiency runs from 87% to 96% of the catalog strength of the wire rope, depending on size and core. Sizes cover 1/4" through 4" rope.
Key Features
- For Flemish eye wire rope splicing
- Designed for low temperature toughness
- Resists cracking when swaged (equals or exceeds stainless steel sleeves)
- Special processed low carbon steel; COLD TUFF® for better swageability
- Can be stamped for identification after swaging: round corner stamps to a maximum depth of 0.015 in. (1/64), on the side of the sleeve in the plane of the sling eye, no less than 0.250 in. (1/4) from either end
Specifications
- Material: special processed low carbon steel
- Wire rope size range: 1/4" to 4"
- Efficiency, 1/4" - 1": 96% IWRC, 93% FC
- Efficiency, 1-1/8" - 2": 92% IWRC, 89% FC
- Efficiency, 2-1/4" and larger: 90% IWRC, 87% FC
- Recommended rope: 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC
Common Applications
- Flemish eye splices in wire rope slings
- Mechanically spliced wire rope assemblies
- Low temperature service where sleeve toughness matters
Standards & Compliance
- Efficiency ratings are based on the catalog strength of wire rope
- Do not use on a wire rope size other than the size shown; fittings are designed only to be used on exact sizes listed
- Before use with any other type lay, construction or grade of wire rope, Crosby recommends the termination be destructive tested and documented
Crosby stock numbers: 1041063, 1041090, 1041107, 1041125, 1041143, 1041161, 1041189, 1041205, 1041223, 1041241, 1041269, 1041287, 1041303, 1041321, 1041349, 1041367, 1041385, 1041401, 1041429, 1041447, 1041483, 1041492, 1041508
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 23 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 1/4" | 1041063 | $2.43 | 0.05 lb | ✓ In Stock | ||
| 5/16" | 1041090 | $2.78 | 0.14 lb | ✓ In Stock | ||
| 3/8" | 1041107 | $2.78 | 0.14 lb | ✓ In Stock | ||
| 7/16" | 1041125 | $4.10 | 0.32 lb | ✓ In Stock | ||
| 1/2" | 1041143 | $4.10 | 0.28 lb | ✓ In Stock | ||
| 9/16" | 1041161 | $7.13 | 0.63 lb | ✓ In Stock | ||
| 5/8" | 1041189 | $7.38 | 0.56 lb | ✓ In Stock | ||
| 3/4" | 1041205 | $10.83 | 0.88 lb | ✓ In Stock | ||
| 7/8" | 1041223 | $16.48 | 1.31 lb | ✓ In Stock | ||
| 1" | 1041241 | $23.98 | 1.95 lb | ✓ In Stock | ||
| 1-1/8" | 1041269 | $32.45 | 2.6 lb | ✓ In Stock | ||
| 1-1/4" | 1041287 | $41.65 | 3.55 lb | ✓ In Stock | ||
| 1-3/8" | 1041303 | $59.80 | 4.23 lb | ✓ In Stock | ||
| 1-1/2" | 1041321 | $69.30 | 4.99 lb | ✓ In Stock | ||
| 1-3/4" | 1041349 | $106.00 | 8.05 lb | ✓ In Stock | ||
| 2" | 1041367 | $159.80 | 11.31 lb | ✓ In Stock | ||
| 2-1/4" | 1041385 | $258.00 | 19.36 lb | ✓ In Stock | ||
| 2-1/2" | 1041401 | $376.00 | 23.52 lb | ✓ In Stock | ||
| 2-3/4" | 1041429 | $509.00 | 28.0 lb | ✓ In Stock | ||
| 3" | 1041447 | $542.00 | 29.4 lb | ✓ In Stock | ||
| 3-1/2" | 1041483 | $972.00 | 46.4 lb | ✓ In Stock | ||
| 3-3/4" | 1041492 | $1,168.00 | 55.0 lb | ✓ In Stock | ||
| 4" | 1041508 | $1,093.00 | 68.0 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

