Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.

| Size | Rating basis | Weight (lb)(kg) | A (in)(mm) | C (in)(mm) | C tol (in)(mm) | D (in)(mm) | F (in)(mm) | G (in)(mm) | H (in)(mm) | J (in)(mm) | L (in)(mm) | M (in)(mm) | N (in)(mm) | Structural strand (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7/16-1/2 (11-13 mm) | 100% efficiency | 2.251.02 | 5.56141.0 | 1.025.4 | 0.061.52 | 1.025.4 | 0.5614.2 | 0.9423.9 | 1.8847.8 | 2.563.5 | 2.051.0 | 1.8847.8 | 0.512.7 | -- | 1039664 |
| 9/16-5/8 (14-16 mm) | 100% efficiency | 3.61.63 | 6.75171.0 | 1.2531.8 | 0.061.52 | 1.1930.2 | 0.6917.5 | 1.1328.7 | 2.2557.0 | 3.076.0 | 2.563.5 | 2.2557.0 | 0.6414.2 | 1/212-13 | 1039682 |
| 3/4 (18 mm) | 100% efficiency | 5.832.64 | 7.94202.0 | 1.538.1 | 0.061.52 | 1.3835.1 | 0.8120.6 | 1.2531.8 | 2.6266.5 | 3.589.0 | 3.076.0 | 2.6266.5 | 0.6215.7 | 9/16-5/814-16 | 1039708 |
| 7/8 (20-22 mm) | 100% efficiency | 9.654.38 | 9.25235.0 | 1.7544.5 | 0.061.52 | 1.6341.4 | 0.9423.9 | 1.538.1 | 3.2582.5 | 4.0102.0 | 3.589.0 | 3.1379.5 | 0.820.3 | 11/16-3/418-19 | 1039726 |
| 1 (24-26 mm) | 100% efficiency | 15.57.03 | 10.56268.0 | 2.051.0 | 0.061.52 | 2.051.0 | 1.1328.7 | 1.7544.5 | 3.7595.5 | 4.5114.0 | 4.0102.0 | 3.7595.5 | 0.8822.4 | 13/16-7/820-22 | 1039744 |
| 1-1/8 (28-30 mm) | 100% efficiency | 21.59.75 | 11.81300.0 | 2.2557.0 | 0.123.05 | 2.2557.0 | 1.2531.8 | 2.051.0 | 4.12105.0 | 5.0127.0 | 4.62117.0 | 4.12105.0 | 1.025.4 | 15/16-124-26 | 1039762 |
| 1-1/4 - 1-3/8 (32-35 mm) | 100% efficiency | 31.014.1 | 13.19335.0 | 2.563.5 | 0.123.05 | 2.563.5 | 1.538.1 | 2.2557.0 | 4.75121.0 | 5.5140.0 | 5.0127.0 | 4.75121.0 | 1.1328.7 | 1-1/16 - 1-1/828 | 1039780 |
| 1-1/2 (38 mm) | 100% efficiency | 47.2521.4 | 15.12384.0 | 3.076.0 | 0.123.05 | 2.7570.0 | 1.6341.4 | 2.7570.0 | 5.25133.0 | 6.0152.0 | 6.0152.0 | 5.38137.0 | 1.1930.2 | 1-3/16 - 1-1/430-32 | 1039806 |
| 1-5/8 (40-42 mm) | 100% efficiency | 55.024.9 | 16.25413.0 | 3.076.0 | 0.123.05 | 3.076.0 | 1.7544.5 | 3.076.0 | 5.5140.0 | 6.5165.0 | 6.5165.0 | 5.75146.0 | 1.3133.3 | 1-5/16 - 1-3/833-35 | 1039824 |
| 1-3/4 - 1-7/8 (44-48 mm) | 100% efficiency | 82.037.2 | 18.25464.0 | 3.589.0 | 0.123.05 | 3.589.0 | 2.051.0 | 3.1379.5 | 6.38162.0 | 7.5191.0 | 7.0178.0 | 6.5165.0 | 1.5639.6 | 1-7/16 - 1-5/836-40 | 1039842 |
| 2 - 2-1/8 (50-54 mm) | 100% efficiency | 129.059.0 | 21.5546.0 | 4.0102.0 | 0.123.05 | 3.7595.5 | 2.2557.0 | 3.7595.5 | 7.38187.0 | 8.5216.0 | 9.0229.0 | 7.0178.0 | 1.8146.0 | 1-11/16 - 1-3/442-45 | 1039860 |
| 2-1/4 - 2-3/8 (56-60 mm) | 100% efficiency | 167.076.0 | 23.5597.0 | 4.5114.0 | 0.123.05 | 4.25108.0 | 2.563.5 | 4.0102.0 | 8.25210.0 | 9.0229.0 | 10.0254.0 | 7.75197.0 | 2.1354.0 | 1-13/16 - 1-7/846-48 | 1039888 |
| 2-1/2 - 2-5/8 (64-67 mm) | 100% efficiency | 252.0114.0 | 25.5648.0 | 5.0127.0 | 0.123.05 | 4.75121.0 | 2.8873.0 | 4.5114.0 | 9.25235.0 | 9.75248.0 | 10.75274.0 | 8.5216.0 | 2.3860.5 | 1-15/16 - 2-1/850-54 | 1041642 |
| 2-3/4 - 2-7/8 (70-73 mm) | 100% efficiency | 315.0143.0 | 27.25692.0 | 5.25133.0 | 0.256.35 | 5.0127.0 | 3.1279.0 | 4.88124.0 | 10.5267.0 | 11.0279.0 | 11.0279.0 | 9.0229.0 | 2.8873.0 | 2-3/16 - 2-7/1656-62 | 1041660 |
| 3 - 3-1/8 (75-80 mm) | 100% efficiency | 380.0172.0 | 29.0737.0 | 5.75146.0 | 0.256.35 | 5.25133.0 | 3.3886.0 | 5.25133.0 | 11.12282.0 | 12.0305.0 | 11.25287.0 | 9.5241.0 | 3.076.0 | 2-1/2 - 2-5/864-67 | 1041688 |
| 3-1/4 - 3-3/8 (82-86 mm) | 100% efficiency | 434.0197.0 | 30.88784.0 | 6.25159.0 | 0.256.35 | 5.5140.0 | 3.6292.0 | 5.75146.0 | 11.88302.0 | 13.0330.0 | 11.75300.0 | 10.0254.0 | 3.1279.0 | 2-3/4 - 2-7/870-73 | 1041704 |
| 3-1/2 - 3-5/8 (88-92 mm) | 100% efficiency | 563.0255.0 | 33.25845.0 | 6.75171.0 | 0.256.35 | 6.0152.0 | 3.8898.5 | 6.5165.0 | 12.38314.0 | 14.0356.0 | 12.5318.0 | 10.75274.0 | 3.2582.5 | 3 - 3-1/876-80 | 1041722 |
| 3-3/4 - 4 (94-102 mm) | 100% efficiency | 783.0355.0 | 36.25921.0 | 7.5191.0 | 0.256.35 | 7.0178.0 | 4.25108.0 | 7.25184.0 | 13.62346.0 | 15.0381.0 | 13.5343.0 | 12.5318.0 | 3.589.0 | -- | 1041740 |
This fitting does not carry a Working Load Limit of its own — it is rated by the efficiency of the termination it forms with the rope, so the governing figure is a percentage of the rope’s breaking strength. Size the assembly from the rope, not from the fitting. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby S-416 Open Spelter Socket (also searched as S416, Crosby open spelter socket, self-colored G-416) is the self-colored (S.C.) version of the G-416 open spelter socket, supplied with a round pin. Spelter socket terminations carry an efficiency rating of 100% of the catalog strength of the wire rope. Sizes run from 7/16" - 1/2" through 3-3/4" - 4" rope.
Key Features
- Forged steel sockets through 1-1/2"; cast alloy steel 1-5/8" and larger
- Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope
- Ratings are based on recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope
- All cast steel sockets 1-5/8" and larger are magnetic particle inspected and ultrasonic inspected; proof testing available on special order
- Strand constructed with a minimal number of wires (e.g. 1 x 7) requires a socket basket length of five times the strand diameter or fifty times the wire diameter, whichever is greater
- Also available from Crosby with bolt, nut and cotter (S-416B self-colored)
Specifications
- Material: forged steel through 1-1/2"; cast alloy steel 1-5/8" through 4"
- Finish: self-colored
- Efficiency: 100% of the catalog strength of wire rope
- Wire rope size range: 7/16" - 1/2" to 3-3/4" - 4"
- Rating basis: termination efficiency (Crosby also publishes an ultimate load per size)
Common Applications
- Permanent wire rope terminations made by socketing
- Boom pendants and standing rigging
- Structural strand terminations (Crosby lists a strand size for each socket)
- Wire rope assemblies needing a full-efficiency end termination
Standards & Compliance
- Open grooved sockets meet the performance requirements of Federal Specification RR-S-550F, Type A, except for those provisions required of the contractor
Crosby stock numbers: 1039664, 1039682, 1039708, 1039726, 1039744, 1039762, 1039780, 1039806, 1039824, 1039842, 1039860, 1039888, 1041642, 1041660, 1041688, 1041704, 1041722, 1041740
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 18 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 7/16 - 1/2" | 1039664 | $119.90 | 1.1 lb | ✓ In Stock | ||
| 9/16 - 5/8" | 1039682 | $146.30 | 4.0 lb | ✓ In Stock | ||
| 3/4" | 1039708 | $175.30 | 5.83 lb | ✓ In Stock | ||
| 7/8" | 1039726 | $252.00 | 9.58 lb | ✓ In Stock | ||
| 1" | 1039744 | $488.00 | 15.5 lb | ✓ In Stock | ||
| 1-1/8" | 1039762 | $503.00 | 21.5 lb | ✓ In Stock | ||
| 1-1/4 - 1-3/8" | 1039780 | $678.00 | 31.0 lb | ✓ In Stock | ||
| 1-1/2" | 1039806 | $1,464.00 | 47.25 lb | ✓ In Stock | ||
| 1-5/8" | 1039824 | $1,691.00 | 53.88 lb | ✓ In Stock | ||
| 1-3/4 - 1-7/8" | 1039842 | $2,538.00 | 82.0 lb | ✓ In Stock | ||
| 2 - 2-1/8" | 1039860 | $2,865.00 | 125.0 lb | ✓ In Stock | ||
| 2-1/4 - 2-3/8" | 1039888 | $3,882.00 | 167.0 lb | ✓ In Stock | ||
| 2-1/2 - 2-5/8" | 1041642 | $5,224.00 | 252.0 lb | ✓ In Stock | ||
| 2-3/4 - 2-7/8" | 1041660 | $7,636.00 | 278.0 lb | ✓ In Stock | ||
| 3 - 3-1/8" | 1041688 | $10,358.00 | 380.0 lb | ✓ In Stock | ||
| 3-1/4 - 3-3/8" | 1041704 | $10,971.00 | 434.0 lb | ✓ In Stock | ||
| 3-1/2 - 3-5/8" | 1041722 | $12,576.00 | 563.0 lb | ✓ In Stock | ||
| 3-3/4 - 4" | 1041740 | $17,497.00 | 783.0 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

