Crosby S-409 COLD TUFF Swage Button

CrosbySKU: 1040171

Size: 1/8"
Price:
Sale price$5.13

Manufacturer Documents

Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.

Specifications — Full Dimensions by Size

This item is not rated by a simple design factor. The manufacturer states: “98% efficiency”
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.
Crosby S-409 COLD TUFF Swage Button dimensions
Dimension Legend
A
Outside diameter (before swage)
B
Length (before swage)
C
Bore diameter (before swage)
D
Maximum diameter after swage
E
Length after swage, measured from outside end of termination
SizeRating
basis
Weight (lb)(kg)A (in)(mm)B (in)(mm)C (in)(mm)D (in)(mm)E (in)(mm)Stock #
1/8 (3 mm)98% efficiency0.020.00910.4210.70.512.70.143.560.410.20.6115.51040171
3/16 (5 mm)98% efficiency0.040.01810.5614.20.717.80.25.080.5213.20.8421.31040215
1/4 (6-7 mm)98% efficiency0.080.03630.6817.31.0626.90.317.870.5814.71.4133.51040251
5/16 (8 mm)98% efficiency0.160.07260.8822.41.1328.70.369.140.7719.61.3333.81040297
3/8 (9-10 mm)98% efficiency0.150.0680.8822.41.4837.60.4210.70.7719.61.6942.91040313
7/16 (11 mm)98% efficiency0.30.1361.1328.71.6341.40.4812.21.0326.21.9449.31040331
1/2 (13 mm)98% efficiency0.50.2271.3133.31.8948.00.5514.01.1629.52.1755.11040359
9/16 (14 mm)98% efficiency0.70.3181.4436.62.0251.30.6115.51.2932.82.4161.21040377
5/8 (16 mm)98% efficiency1.00.4541.5639.62.4261.50.6717.01.4236.12.8973.41040395
3/4 (18-20 mm)98% efficiency1.310.591.6842.72.7469.60.820.31.5539.63.2582.61040411
7/8 (22 mm)98% efficiency2.21.02.050.83.2783.10.9423.91.845.73.8698.01040439
1 (25-26 mm)98% efficiency3.11.412.2557.23.6793.21.0626.92.0552.14.36111.01040457
1-1/8 (28-29 mm)98% efficiency4.52.042.5665.04.05103.01.1930.22.358.44.81122.01040475
1-1/4 (31-32 mm)98% efficiency6.52.952.8171.44.57116.01.3333.82.5665.05.42138.01040493

This fitting does not carry a Working Load Limit of its own — it is rated by the efficiency of the termination it forms with the rope, so the governing figure is a percentage of the rope’s breaking strength. Size the assembly from the rope, not from the fitting. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.

The Crosby S-409 COLD TUFF® Steel Swage Button (also searched as S409, Crosby swage button) is a special processed low carbon steel button swaged onto wire rope. Swage button terminations have an efficiency rating of 98% based on the catalog strength of the wire rope. Sizes cover 1/8" through 1-1/4" rope.

Key Features

  • Swage button terminations have an efficiency rating of 98% based on the catalog strength of wire rope
  • Special processed low carbon steel
  • COLD TUFF® for better swageability
  • Can be stamped for identification after swaging without concern for fractures (per the Crosby Wire Rope End Terminations User's Manual)
  • Crosby lists a size number, before- and after-swage dimensions and length for each size

Specifications

  • Material: special processed low carbon steel
  • Efficiency: 98% of the catalog strength of wire rope
  • Wire rope size range: 1/8" to 1-1/4"
  • Recommended rope: 6 x 19 or 6 x 37, IPS or XIP (EIP), RRL, FC or IWRC
  • Length is measured from the outside end of the termination

Common Applications

  • Swaged button end stops on wire rope
  • Rope ends that seat against a fitting or plate
  • Swaged wire rope assemblies needing a compact end termination

Standards & Compliance

  • Fittings are designed only to be used on exact sizes listed
  • Before use with any other type lay, construction or grade of wire rope, Crosby recommends the termination be destructive tested and documented

Crosby stock numbers: 1040171, 1040215, 1040251, 1040297, 1040313, 1040331, 1040359, 1040377, 1040395, 1040411, 1040439, 1040457, 1040475, 1040493

Safety & Standards

Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.

Governing Standards

  • ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
  • ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
  • ASME B30.10 — hooks
  • OSHA 1910.184 and 1926.251 — general industry and construction sling safety
  • WSTDA WS-2 and RS-1 — web and round sling design
  • 49 CFR 393.102 to 393.130 — DOT cargo tie-down
  • NACM — welded steel chain grade specs

Inspection & Safety

Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.

WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).

Order Sheet — 14 variants

Search below or click column headers to sort. Add any quantity per row to your cart.

Option ▴▾ SKU ▴▾ Price ▴▾ Weight ▴▾ Stock Qty Add
1/8" 1040171 $5.13 0.02 lb ✓ In Stock
3/16" 1040215 $5.52 0.04 lb ✓ In Stock
1/4" 1040251 $6.93 0.08 lb ✓ In Stock
5/16" 1040297 $8.82 0.16 lb ✓ In Stock
3/8" 1040313 $9.97 0.15 lb ✓ In Stock
7/16" 1040331 $13.58 0.3 lb ✓ In Stock
1/2" 1040359 $17.57 0.5 lb ✓ In Stock
9/16" 1040377 $31.70 0.7 lb ✓ In Stock
5/8" 1040395 $35.65 1.0 lb ✓ In Stock
3/4" 1040411 $43.35 1.31 lb ✓ In Stock
7/8" 1040439 $48.50 2.2 lb ✓ In Stock
1" 1040457 $62.10 3.1 lb ✓ In Stock
1-1/8" 1040475 $122.20 4.5 lb ✓ In Stock
1-1/4" 1040493 $182.20 6.5 lb ✓ In Stock

Weights are approximate shipping weights.

Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.

Chat with our AI rigging specialist

Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.

Prefer to email?

Send to: sales@slingcenter.com

Include:

  • What you are lifting (shape, material, fragility)
  • Load weight (lb)
  • Length / reach needed
  • Pick points — smooth lugs, sharp edges, or a hook?
  • Environment — indoor, outdoor, heat, saltwater, chemicals?
  • Quantity and timeline
  • Your phone number if you want a callback

Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.

Why SlingCenter

American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

Enter your zip to see delivery estimates at checkout.

Go to Cart to Estimate
SlingCenter.com

Genuine Crosby® rigging hardware

Every rating on our Crosby pages is checked against Crosby’s own catalog. Build the whole rig — sling, shackle and hook — in one order.

Shop all Crosby →

You may also like

Recently viewed