Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
This is below the 5:1 commonly specified for wire rope and synthetic sling systems (4:1 is standard for alloy chain components under ASME B30.9). Where a 5:1 column is shown it is SlingCenter’s derate — the manufacturer’s figure remains the rating of record.

| Size (in) | WLL 4:1 (lb)(t) | WLL 5:1(lb)(t) SlingCenter derate | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | C (in)(mm) | D (in)(mm) | E (in)(mm) | F (in)(mm) | G (in)(mm) | K (in)(mm) | M (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 4,4092 | 3,5271.6 | 0.750.34 | 0.8120.6 | 0.6316 | 0.512.7 | 0.512.7 | 1.8146 | 1.1930.2 | 1.6341.4 | 3.0377 | 2.2256.5 | 1018703 |
| 5/8 | 7,1653-1/4 | 5,7322.6 | 1.230.56 | 1.0627 | 0.7519.1 | 0.6316 | 0.6316 | 2.358.5 | 1.538.1 | 2.0151 | 3.7896 | 2.7670 | 1018721 |
| 3/4 | 10,4714-3/4 | 8,3773.8 | 2.180.99 | 1.2531.8 | 0.8822.4 | 0.7519.1 | 0.7519.1 | 2.7670 | 1.8146 | 2.3860.5 | 4.53115 | 3.2582.5 | 1018749 |
| 7/8 | 14,3306-1/2 | 11,4645.2 | 3.291.49 | 1.4436.6 | 125.4 | 0.8822.4 | 0.8822.4 | 3.1981 | 2.1354 | 2.8171.5 | 5.31135 | 3.6893.5 | 1018767 |
The 4:1 column is the manufacturer’s published Working Load Limit and is the rating of record — the figure marked on the product. The 5:1 column is calculated by SlingCenter as WLL × 4 ÷ 5, for comparison against components rated at the 5:1 commonly specified for wire rope and synthetic sling systems. It is always the lower of the two. We never restate a Working Load Limit upward. Pound figures are converted by SlingCenter from the manufacturer’s metric rating at 1 t = 2,204.62 lb and rounded down — a unit conversion only, not a change of rating. The metric figure is the rating of record. Lowercase t is the metric tonne (1,000 kg / 2,204.62 lb), the manufacturer’s own notation — not the US short ton.
The Crosby S-2131 trawling shackle (also searched as S2131, 2131 shackle or Crosby trawl shackle) has a square pin head for trawling. It is forged, quenched and tempered, with alloy pins, and is painted Crosby red. Nominal sizes on this listing run from 1/2 in. to 7/8 in., with Working Load Limits from 2 t to 6.5 t at a 4 to 1 design factor.
Key Features
- Square pin head for trawling
- Forged, quenched and tempered, with alloy pins
- Working Load Limit permanently shown on every shackle
- Painted Crosby red
- 4 to 1 design factor
Specifications
- Construction: forged, quenched and tempered, with alloy pin
- Finish: painted Crosby red
- Design factor: 4:1
- Nominal sizes: 1/2 in. to 7/8 in.
- Working Load Limit: 2 t to 6.5 t
Common Applications
- Trawl gear and commercial fishing rigging
- Marine connections where a square head pin is required
- Connecting chain, wire rope and fittings in trawl systems
Standards & Compliance
Rated at a 4 to 1 design factor. Review Crosby's application and warning information before use.
Crosby stock numbers: 1018703, 1018721, 1018749, 1018767
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 4 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 1/2 (WLL 2) | 1018703 | $25.75 | 0.75 lb | ✓ In Stock | ||
| 5/8 (WLL 3-1/4) | 1018721 | $41.90 | 1.24 lb | ✓ In Stock | ||
| 3/4 (WLL 4-3/4) | 1018749 | $52.80 | 2.18 lb | ✓ In Stock | ||
| 7/8 (WLL 6-1/2) | 1018767 | $65.40 | 3.28 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

