Manufacturer Documents
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.

| Size | WLL (lb)(t) | Design Factor | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | C (in)(mm) | D (in)(mm) | E (in)(mm) | G (in)(mm) | K (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.5 t | 1,1020.5 t | EN 13155 / ASME B30.20 | 3.531.6 | 0 - 0.630 - 17 | 1.0226 | 5.31135 | 5.2132 | 1.1429 | 2.0151 | 0.4311 | 2700116 |
Dimensions and ratings sourced directly from manufacturer catalog pages. SlingCenter does not derive or restate ratings. Pound figures are converted by SlingCenter from the manufacturer’s metric rating at 1 t = 2,204.62 lb and rounded down — a unit conversion only, not a change of rating. The metric figure is the rating of record. Lowercase t is the metric tonne (1,000 kg / 2,204.62 lb), the manufacturer’s own notation — not the US short ton. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby IPVK steel drum clamp for edge lift (also searched as IPVK, IP VK, IP-VK, drum edge clamp) is part of the Crosby IP lifting clamp range. It is designed to lift, move and transfer 50 to 55 gallon drums with steel tops. It automatically locks on the drum and can be used alone or in pairs. It covers a jaw opening of 0 to 0.63 in and a Working Load Limit (WLL) of 0.5 t (metric tonnes).
Key Features
- Automatically locks on the drum
- Can be used alone or in pairs
- Welded alloy steel body for strength and smaller size, with forged alloy components where required
- Individually proof tested to 2 times the Working Load Limit, with certification
- Crosby IP logo, Working Load Limit and jaw opening permanently stamped on the body
- Individually serialized, with the serial number and proof load test date stamped on the body; user manual and test certificate included with each clamp
- Maintenance and repair kits available
- Higher Working Load Limits available upon request
Specifications
- Jaw opening: 0 to 0.63 in
- Working Load Limit: 0.5 t (metric tonnes, as printed by Crosby)
- Design factor: based on EN 13155 and ASME B30.20
- For 50-55 gallon drums with steel tops
- Temperature range -40 °F to +212 °F (-40 °C to +100 °C)
Common Applications
- Vertical lifting of 50-55 gallon steel-top drums
- Lifting drums singly or in pairs
- Drum transfer in plants and warehouses
Standards & Compliance
Design factor based on EN 13155 and ASME B30.20 (Crosby catalog).
Crosby stock numbers: 2700116
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate


