Crosby IPU10H Universal Plate Vertical Lifting Clamp - Hard Materials

CrosbySKU: 2702175

WLL: 0.5 t (WLL 0.5 t)
Price:
Sale price$1,893.00

Manufacturer Documents

Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.

Specifications — Full Dimensions by Size

This item is not rated by a simple design factor. The manufacturer states: “Design Factor based on EN 13155 and ASME B30.20”
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.
Crosby IPU10H Universal Plate Vertical Lifting Clamp - Hard Materials dimensions
Dimension Legend
A
Jaw opening
SizeWLL (lb)(t)Design
Factor
Weight (lb)(kg)A (in)(mm)B (in)(mm)C (in)(mm)D (in)(mm)E (in)(mm)F (in)(mm)G (in)(mm)H (in)(mm)K (in)(mm)J (in)(mm)Stock #
0.5 t1,1020.5 tEN 13155 / ASME B30.204.191.90 - 0.630 - 161.73445.121308.52161.57404.531151.65421.1280.4311——2702175
0.75 t1,6530.75 tEN 13155 / ASME B30.205.292.40 - 0.750 - 201.77455.471398.862251.57405.01271.61421.5380.4311——2702163
1 t2,2041 tEN 13155 / ASME B30.2018.37.60 - 1.380 - 353.07787.9120114.493682.76707.41882.52642.17550.6316——2702177
2 t4,4092 tEN 13155 / ASME B30.2032.614.80 - 1.560 - 403.941009.9625317.174362.95758.742223.07782.36600.7920——2702165
3 t6,6133 tEN 13155 / ASME B30.2035.316.00 - 1.560 - 403.941009.9625317.174362.95758.942273.23822.56650.7920——2702167
4.5 t9,9204.5 tEN 13155 / ASME B30.2052.924.00 - 2.000 - 504.9612611.8930220.675253.158011.52923.31843.74950.79201.73442702169
6 t13,2276 tEN 13155 / ASME B30.2065.029.50 - 2.000 - 504.9612612.832521.735522.767012.23103.7944.091040.79201.73442702171

Dimensions and ratings sourced directly from manufacturer catalog pages. SlingCenter does not derive or restate ratings. Pound figures are converted by SlingCenter from the manufacturer’s metric rating at 1 t = 2,204.62 lb and rounded down — a unit conversion only, not a change of rating. The metric figure is the rating of record. Lowercase t is the metric tonne (1,000 kg / 2,204.62 lb), the manufacturer’s own notation — not the US short ton. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.

The Crosby IPU10H universal vertical lifting clamp for hard materials (also searched as IPU10H, IP U10H, IPU-10H, IPU10 hard material clamp) is part of the Crosby IP lifting clamp range. It is the IPU10 version for materials with a surface hardness to 472 HV10 (450 HB), with a universal hoisting eye for lifting in any direction and a full 180° turning range. It covers a jaw opening of 0 to 2.00 in and a Working Load Limit (WLL) of 0.5 t to 6 t (metric tonnes).

Key Features

  • For materials with a surface hardness to 472 HV10 (450 HB)
  • Universal (swiveling) hoisting eye for lifting in any direction
  • Lock-open / lock-closed latch applies pretension to the material when closed, then releases it; when closed there is no protruding lever outside the body
  • Full 180° turning range
  • Welded alloy steel body for strength and smaller size, with forged alloy components where required
  • Lifting eye in alloy steel, quenched and tempered
  • Individually proof tested to 2 times the Working Load Limit, with certification
  • Clear markings: manufacturer, model, minimum and maximum WLL, jaw opening in mm and inch, serial number and CE marking
  • Individually serialized, with the serial number and proof load test date stamped on the body; user manual and test certificate included with each clamp
  • Maintenance and repair kits available
  • Higher Working Load Limits available upon request

Specifications

  • Jaw opening: 0 to 2.00 in
  • Working Load Limit: 0.5 t to 6 t (metric tonnes, as printed by Crosby)
  • Design factor: based on EN 13155 and ASME B30.20
  • Hard-material camsegment, for surface hardness to 472 HV10 (450 HB)
  • Minimum WLL is 10% of maximum WLL
  • For materials with a surface hardness to 279 HV10, Crosby states only 5% of minimum WLL is needed

Common Applications

  • Lifting, turning and vertical transfer of hardened or wear-resistant plate
  • Turning hard plate from horizontal to vertical and back (180°)
  • Lifting hard-material fabrications with a multiple-leg sling without side-loading the clamp

Standards & Compliance

Design factor based on EN 13155 and ASME B30.20 (Crosby catalog). Crosby lists CE marking among the markings on the IP10 / IPU10 clamp body.

Crosby stock numbers: 2702175, 2702163, 2702177, 2702165, 2702167, 2702169, 2702171

Safety & Standards

Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.

Governing Standards

  • ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
  • ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
  • ASME B30.10 — hooks
  • OSHA 1910.184 and 1926.251 — general industry and construction sling safety
  • WSTDA WS-2 and RS-1 — web and round sling design
  • 49 CFR 393.102 to 393.130 — DOT cargo tie-down
  • NACM — welded steel chain grade specs

Inspection & Safety

Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.

WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).

Order Sheet — 7 variants

Search below or click column headers to sort. Add any quantity per row to your cart.

Option ▴▾ SKU ▴▾ Price ▴▾ Weight ▴▾ Stock Qty Add
0.5 t (WLL 0.5 t) 2702175 $1,893.00 5.3 lb ✓ In Stock
0.75 t (WLL 0.75 t) 2702163 $2,771.00 5.3 lb ✓ In Stock
1 t (WLL 1 t) 2702177 $2,339.00 16.8 lb ✓ In Stock
2 t (WLL 2 t) 2702165 $3,054.00 32.6 lb ✓ In Stock
3 t (WLL 3 t) 2702167 $3,405.00 35.3 lb ✓ In Stock
4.5 t (WLL 4.5 t) 2702169 $3,791.00 52.9 lb ✓ In Stock
6 t (WLL 6 t) 2702171 $5,489.00 65.0 lb ✓ In Stock

Weights are approximate shipping weights.

Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.

Chat with our AI rigging specialist

Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.

Prefer to email?

Send to: sales@slingcenter.com

Include:

  • What you are lifting (shape, material, fragility)
  • Load weight (lb)
  • Length / reach needed
  • Pick points — smooth lugs, sharp edges, or a hook?
  • Environment — indoor, outdoor, heat, saltwater, chemicals?
  • Quantity and timeline
  • Your phone number if you want a callback

Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.

Why SlingCenter

American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

Enter your zip to see delivery estimates at checkout.

Go to Cart to Estimate
SlingCenter.com

Genuine Crosby® rigging hardware

Every rating on our Crosby pages is checked against Crosby’s own catalog. Build the whole rig — sling, shackle and hook — in one order.

Shop all Crosby →

You may also like

Recently viewed