Manufacturer Documents
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Terminations and weld-on fittings are commonly rated by efficiency, or by the strength of the assembly they are built into, rather than by a WLL design factor. Confirm the governing figure for your application before use, or email sales@slingcenter.com.

| Size | WLL (lb)(t) | Design Factor | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | C (in)(mm) | D (in)(mm) | E (in)(mm) | F (in)(mm) | G (in)(mm) | H (in)(mm) | K (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 t | 2,2041 t | EN 13155 / ASME B30.20 | 10.44.7 | 0.81 - 1.4420 - 37 | 3.8297 | 8.66220 | 12.64321 | 1.5740 | 7.87200 | 3.1580 | 2.256 | 0.4311 | 2703814 |
| 1 t | 2,2041 t | EN 13155 / ASME B30.20 | 12.15.5 | 0 - 1.000 - 25 | 3.8297 | 9.37238 | 13.82351 | 1.5740 | 8.39213 | 3.1580 | 2.4863 | 0.4311 | 2703819 |
Dimensions and ratings sourced directly from manufacturer catalog pages. SlingCenter does not derive or restate ratings. Pound figures are converted by SlingCenter from the manufacturer’s metric rating at 1 t = 2,204.62 lb and rounded down — a unit conversion only, not a change of rating. The metric figure is the rating of record. Lowercase t is the metric tonne (1,000 kg / 2,204.62 lb), the manufacturer’s own notation — not the US short ton. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby IPNM10NJ non-marring vertical lifting clamp with large jaw (also searched as IPNM10NJ, IPNM10NJ1, IP NM10NJ, IPNM10 large jaw) is part of the Crosby IP lifting clamp range. It is the larger-jaw version of the IPNM10N, for lifting, turning and vertical transfer of sheet, plate or fabrications (180°) without marring the surface. Two 1 t versions are offered: IPNM10NJ (0.81 to 1.44 in jaw) and IPNM10NJ1 (0 to 1.00 in jaw). It covers a jaw opening of 0 to 1.44 in and a Working Load Limit (WLL) of 1 t (metric tonnes).
Key Features
- Larger jaw opening than the standard IPNM10N
- Lifts materials such as aluminum, stainless steel, painted materials, aircraft skins, composite material, glass and plastic without marring or scratching the surface
- Full 180° turning range for material transfer, turning or moving
- Lock-open / lock-closed latch for pretension on the material and then release
- Welded alloy steel body for strength and smaller size, with forged alloy components where required
- Individually proof tested to 2 times the Working Load Limit, with certification
- Crosby IP logo, Working Load Limit and jaw opening permanently stamped on the body
- Individually serialized, with the serial number and proof load test date stamped on the body; user manual and test certificate included with each clamp
- Maintenance replacement kits available
- Special jaw openings or curved jaws available upon request
Specifications
- Jaw opening: 0 to 1.44 in
- Working Load Limit: 1 t (metric tonnes, as printed by Crosby)
- Design factor: based on EN 13155 and ASME B30.20
- Material must be clean and dry
- There is no minimum WLL required
- Temperature range -4 °F to +158 °F (-20 °C to +70 °C)
- Optional brake pad lining available for an extended temperature range from -40 °F (-40 °C)
Common Applications
- Vertical lifting of thicker aluminum or stainless sheet without marring
- Handling painted or coated panels
- Lifting composite, glass and plastic panels
Standards & Compliance
Design factor based on EN 13155 and ASME B30.20 (Crosby catalog).
Crosby stock numbers: 2703814, 2703819
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 2 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| IPNM10NJ / 1 t (WLL 1 t) | 2703814 | $3,840.00 | 12.1 lb | ✓ In Stock | ||
| IPNM10NJ1 / 1 t (WLL 1 t) | 2703819 | $6,280.00 | 12.5 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

