Crosby HG-223 Hook & Hook Turnbuckle

CrosbySKU: 1030333

Size: 1" × 12" (WLL 5,000 lbs)
Price:
Sale price$345.00

Manufacturer Documents

Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.

Specifications — Full Dimensions by Size

Find my size:

Type the load and we will highlight every size rated for it. Or click any row to pick that size.

Working Load Limits below are as certified by the manufacturer at a 5:1 design factor — minimum breaking load = 5 × WLL.
Crosby HG-223 Hook & Hook Turnbuckle dimensions
Dimension Legend
A
Thread diameter
D
Hook throat opening
E
Hook end length, closed (catalog: E Closed)
F
Hook outside height
J
Length hook to hook, open (catalog: J Open)
K
Length hook to hook, closed (catalog: K Closed)
M
Overall length, open (catalog: M Open)
N
Overall length, closed (catalog: N Closed)
BB
Body opening length
SizeWLL (lb)Weight (lb)(kg)A (in)(mm)D (in)(mm)E (in)(mm)F (in)(mm)J (in)(mm)K (in)(mm)M (in)(mm)N (in)(mm)BB (in)(mm)Stock #
1 x 125,00014.86.71.025.41.2531.86.56167.04.25108.036.59929.025.06637.040.121019.028.12714.012.18309.01030333

Dimensions and ratings sourced directly from manufacturer catalog pages. SlingCenter does not derive or restate ratings. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.

The Crosby HG-223 Hook & Hook Turnbuckle (also searched as HG223, Crosby hook and hook turnbuckle) is a hot-dip galvanized turnbuckle with forged hook end fittings. It is offered in the 1" x 12" thread diameter and take-up, with a Working Load Limit of 5,000 lb.

Key Features

  • End fittings quenched and tempered or normalized; body heat-treated by normalizing
  • Hot-dip galvanized steel
  • Hooks are forged with a greater cross sectional area, resulting in a stronger hook with better fatigue properties
  • Modified UNJ thread on end fittings for improved fatigue properties; body has UNC threads
  • Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit
  • Lock nuts available for all sizes

Specifications

  • Material: steel; end fittings quenched and tempered or normalized, body normalized
  • Finish: hot-dip galvanized
  • Thread diameter and take-up: 1" x 12"
  • Working Load Limit: 5,000 lb
  • Design factor: 5:1; proof load is 2.5 times the Working Load Limit
  • Temperature: Crosby states turnbuckles can be used in general service from -40°F (-40°C) to 400°F (204°C)

Common Applications

  • Tensioning and slack take-up in rigging, guying and bracing
  • Adjusting length in straight, in-line pull assemblies
  • Connecting to eyes, links or shackles with hook ends

Standards & Compliance

  • Meets or exceeds all requirements of ASME B30.26, including identification, ductility, design factor, proof load and temperature requirements
  • Meets the performance requirements of Federal Specification FF-T-791b, Type 1, Form 1, Class 5, and ASTM F-1145, except for those provisions required of the contractor
  • Turnbuckles are recommended for straight or in-line pull only

Crosby stock numbers: 1030333

Safety & Standards

Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.

Governing Standards

  • ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
  • ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
  • ASME B30.10 — hooks
  • OSHA 1910.184 and 1926.251 — general industry and construction sling safety
  • WSTDA WS-2 and RS-1 — web and round sling design
  • 49 CFR 393.102 to 393.130 — DOT cargo tie-down
  • NACM — welded steel chain grade specs

Inspection & Safety

Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.

WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).

Chat with our AI rigging specialist

Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.

Prefer to email?

Send to: sales@slingcenter.com

Include:

  • What you are lifting (shape, material, fragility)
  • Load weight (lb)
  • Length / reach needed
  • Pick points — smooth lugs, sharp edges, or a hook?
  • Environment — indoor, outdoor, heat, saltwater, chemicals?
  • Quantity and timeline
  • Your phone number if you want a callback

Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.

Why SlingCenter

American Express Apple Pay Diners ClubDiscoverGoogle Pay Mastercard PayPalShop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

Enter your zip to see delivery estimates at checkout.

Go to Cart to Estimate
SlingCenter.com

Genuine Crosby® rigging hardware

Every rating on our Crosby pages is checked against Crosby’s own catalog. Build the whole rig — sling, shackle and hook — in one order.

Shop all Crosby →

You may also like

Recently viewed