Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size

| Size | Weight (lb)(kg) | A (in)(mm) | B (in)(mm) | C (in)(mm) | D (in)(mm) | E (in)(mm) | F (in)(mm) | G (in)(mm) | H (in)(mm) | Stock # |
|---|---|---|---|---|---|---|---|---|---|---|
| 1/8 (3-4 mm) | 0.0350.0159 | 1.9449.3 | 1.3133.3 | 1.0626.9 | 0.6917.5 | 0.256.35 | 0.164.05 | 0.051.25 | 0.133.3 | 1037256 |
| 3/16 (5 mm) | 0.0350.0159 | 1.9449.3 | 1.3133.3 | 1.0626.9 | 0.6917.5 | 0.317.85 | 0.225.6 | 0.051.25 | 0.133.3 | 1037274 |
| 1/4 (6-7 mm) | 0.0350.0159 | 1.9449.3 | 1.3133.3 | 1.0626.9 | 0.6917.5 | 0.389.65 | 0.287.1 | 0.051.25 | 0.133.3 | 1037292 |
| 5/16 (8 mm) | 0.040.0181 | 2.1354.0 | 1.538.1 | 1.2531.8 | 0.8120.6 | 0.4411.2 | 0.348.65 | 0.051.25 | 0.133.3 | 1037318 |
| 3/8 (9-10 mm) | 0.0670.0304 | 2.3860.5 | 1.6341.4 | 1.4737.3 | 0.9423.9 | 0.5313.5 | 0.4110.4 | 0.061.5 | 0.164.06 | 1037336 |
| 1/2 (11-13 mm) | 0.1250.0567 | 2.7570.0 | 1.8847.8 | 1.7544.5 | 1.1328.7 | 0.6917.5 | 0.5313.5 | 0.082.05 | 0.194.83 | 1037354 |
| 5/8 (16 mm) | 0.3450.157 | 3.589.0 | 2.2557.0 | 2.3860.5 | 1.3835.1 | 0.9123.1 | 0.6616.8 | 0.133.3 | 0.348.64 | 1037372 |
| 3/4 (18-20 mm) | 0.4710.214 | 3.7595.5 | 2.563.5 | 2.6968.5 | 1.6341.4 | 1.0827.4 | 0.7819.8 | 0.143.55 | 0.348.64 | 1037390 |
| 7/8 (22 mm) | 0.8460.384 | 5.0127.0 | 3.589.0 | 3.1981.0 | 1.8847.8 | 1.2732.3 | 0.9423.9 | 0.164.05 | 0.4411.2 | 1037416 |
| 1 (24-26 mm) | 0.9750.442 | 5.69145.0 | 4.25108.0 | 3.7595.5 | 2.563.5 | 1.3935.3 | 1.0626.9 | 0.164.05 | 0.4110.4 | 1037434 |
| 1-1/8 - 1-1/4 (28-32 mm) | 1.750.79 | 6.25159.0 | 4.5114.0 | 4.31109.0 | 2.7570.0 | 1.7544.5 | 1.3133.3 | 0.225.6 | 0.512.7 | 1037452 |
This fitting does not carry a Working Load Limit of its own — it is rated by the efficiency of the termination it forms with the rope, so the governing figure is a percentage of the rope’s breaking strength. Size the assembly from the rope, not from the fitting. Size is the manufacturer’s nominal trade size and does not change between unit views — this part is ordered and stamped by that size in every market; the millimetre figure beside it is the equivalent, not a different size.
The Crosby G-411 Standard Wire Rope Thimble (also searched as G411, Crosby standard thimble) is a hot-dip galvanized steel thimble that lines the eye of a wire rope termination. It is the standard choice for light duty loading conditions, sized for 1/8" through 1-1/8" - 1-1/4" wire rope.
Key Features
- Hot-dip galvanized steel
- The standard choice for light duty loading conditions and applications
- Sized by wire rope diameter
Specifications
- Material: steel
- Finish: hot-dip galvanized
- Wire rope size range: 1/8" to 1-1/8" - 1-1/4"
- Rating: Thimbles are selected by wire rope diameter; Crosby does not publish a working load limit or efficiency rating for them.
Common Applications
- Protecting the eye of a wire rope termination from wear and crushing
- Wire rope eyes made with clips, sleeves or splices
- Wire rope slings and assemblies
- Light duty wire rope eye terminations
Standards & Compliance
- Meets the performance requirements of Federal Specification FF-T-276C Type II, except for those provisions required of the contractor
Crosby stock numbers: 1037256, 1037274, 1037292, 1037318, 1037336, 1037354, 1037372, 1037390, 1037416, 1037434, 1037452
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 11 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 1/8" | 1037256 | $0.88 | 0.03 lb | ✓ In Stock | ||
| 3/16" | 1037274 | $1.02 | 0.04 lb | ✓ In Stock | ||
| 1/4" | 1037292 | $1.03 | 0.04 lb | ✓ In Stock | ||
| 5/16" | 1037318 | $1.75 | 0.04 lb | ✓ In Stock | ||
| 3/8" | 1037336 | $2.25 | 0.07 lb | ✓ In Stock | ||
| 1/2" | 1037354 | $2.83 | 0.13 lb | ✓ In Stock | ||
| 5/8" | 1037372 | $5.27 | 0.34 lb | ✓ In Stock | ||
| 3/4" | 1037390 | $8.23 | 0.47 lb | ✓ In Stock | ||
| 7/8" | 1037416 | $11.57 | 0.85 lb | ✓ In Stock | ||
| 1" | 1037434 | $19.82 | 0.97 lb | ✓ In Stock | ||
| 1-1/8 - 1-1/4" | 1037452 | $29.70 | 2.28 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate

