Manufacturer Documents
- 📄 Catalog pages — imperial (PDF)
- 📄 Catalog pages — metric (PDF)
- ⚠ Applications & warnings (PDF)
- ↗ Manufacturer product page
Documents are hosted by the manufacturer and open in a new tab. Test and mill certificates for your specific order are available on request — email sales@slingcenter.com with your order number.
Specifications — Full Dimensions by Size
Manufacturer’s full wording: “5:1 on resultant load”
Open the catalog page (PDF)
| Size | WLL (lb)(US tons) | Weight (lb)(kg) | Rope dia (in) | Sheave dia (in) | Stock # |
|---|---|---|---|---|---|
| 12" sheave | 100005 US tons single line pull | 9543.09 | 3/4 | 12 | 775003 |
| 12" sheave | 100005 US tons single line pull | 9543.09 | 3/4 | 12 | 775209 |
| 14" sheave | 100005 US tons single line pull | 10045.36 | 3/4 | 14 | 775058 |
| 14" sheave | 100005 US tons single line pull | 10045.36 | 3/4 | 14 | 775254 |
| 14" sheave | 2000010 US tons single line pull | 10045.36 | 1 | 14 | 775067 |
| 14" sheave | 2000010 US tons single line pull | 10045.36 | 1 | 14 | 775263 |
| 16" sheave | 2000010 US tons single line pull | 13058.97 | 3/4 | 16 | 776672 |
| 16" sheave | 2000010 US tons single line pull | 13058.97 | 1 | 16 | 752956 |
| 16" sheave | 2000010 US tons single line pull | 13058.97 | 1 | 16 | 752965 |
Dimensions and ratings sourced directly from manufacturer catalog pages. SlingCenter does not derive or restate ratings. Capacities are in US short tons (2,000 lb) as published by the manufacturer — not metric tonnes.
The Crosby 566 Cargo Hoisting Block (E-566 / J-566) (also searched as Crosby E566, J566, cargo block, cargo hoist block) is a galvanized single-sheave cargo block for 3/4 in or 1 in wire rope, with a drilled swivel eye (E-566) or oblong swivel eye (J-566). Sheaves are 12, 14 and 16 in, rated 5 or 10 short tons maximum single line pull.
Key Features
- Block is galvanized
- Blocks 14 in and larger have flame-hardened roll forged sheaves that assure greater wire life
- Roll forged sheave is fitted closely into the mortise of the shell so wire cannot jam between sheave and shell
- Tapered roller bearings take both load and side thrusts and hold the sheave central so it cannot chafe or wear on the sides
- Tapered roller bearing with neoprene seals and stainless steel center pin; recessed nuts with lock washers
- Swivel fitting has a permanently sealed thrust bearing
- Pressure lubrication fittings standard on both center pin and swivel
- Individually proof tested at 4 times working load or 2 times resultant load; A.B.S. recognized load test certificates are furnished
Specifications
- Working load: 5 or 10 short tons maximum single line pull (resultant load equals 2 times single line pull; ultimate load equals 5 times the resultant load)
- Design factor: 5:1 based on resultant load
- Wire rope diameter: 3/4 in or 1 in
- Sheave diameter: 12, 14 and 16 in
- Bearing: Tapered roller bearing with neoprene seals
- Finish: Galvanized
- End fitting: Drilled swivel eye (E-566) or oblong swivel eye (J-566)
Common Applications
- Cargo hoisting on freighters and vessels
- Heel and lead block service with Crosby adjuster fittings (E-566)
- Marine and dockside wire rope hoisting
- Hoisting systems rated by single line pull
Standards & Compliance
Crosby rates cargo hoist blocks by the maximum single line pull of the wire rope being used, with a 5:1 design factor based on resultant load. Each block is individually proof tested and A.B.S. recognized load test certificates are furnished. For QG and QK configurations Crosby lists a shackle part number to add to the E or J block; Crosby also lists heel and lead block adjuster fittings (No. 570-576) for use with E-566 cargo blocks. Crosby notes that where corrosion resistance is paramount, hot-dip galvanized finishes are the best solution for saltwater or highly corrosive environments.
Crosby stock numbers: 775003, 775209, 775058, 775254, 775067, 775263, 776672, 752956, 752965
Safety & Standards
Every product we carry is individually marked with Working Load Limit (WLL), manufacturer traceability code, and country of origin. Inspection and mill certificates are available on request — email sales@slingcenter.com with your order number.
Governing Standards
- ASME B30.9 — slings (web, round, wire rope, chain) inspection and use
- ASME B30.26 — rigging hardware (shackles, eye bolts, links, turnbuckles)
- ASME B30.10 — hooks
- OSHA 1910.184 and 1926.251 — general industry and construction sling safety
- WSTDA WS-2 and RS-1 — web and round sling design
- 49 CFR 393.102 to 393.130 — DOT cargo tie-down
- NACM — welded steel chain grade specs
Inspection & Safety
Before every use: visual check for cracks, corrosion, distortion, wear, and illegible markings. Annually (minimum): documented periodic inspection by a trained inspector. Remove from service at first sign of damage. Never repair rigging hardware by welding, heating, or bending.
WARNING: Improper use of rigging can cause death or serious injury. Never exceed the rated Working Load Limit. Apply derating for side-loading, elevated temperature, or chemical exposure. Final application decisions must be made by a Qualified Person per OSHA 1926.32(m).
Order Sheet — 9 variants
Search below or click column headers to sort. Add any quantity per row to your cart.
| Option ▴▾ | SKU ▴▾ | Price ▴▾ | Weight ▴▾ | Stock | Qty | Add |
|---|---|---|---|---|---|---|
| 12" Sheave · 3/4" Wire · 5 US t Line Pull / E-566 · Drilled Swivel Eye | 775003 | $5,260.00 | 95.0 lb | ✓ In Stock | ||
| 12" Sheave · 3/4" Wire · 5 US t Line Pull / J-566 · Oblong Swivel Eye | 775209 | $5,616.00 | 95.0 lb | ✓ In Stock | ||
| 14" Sheave · 3/4" Wire · 5 US t Line Pull / E-566 · Drilled Swivel Eye | 775058 | $6,842.00 | 100.0 lb | ✓ In Stock | ||
| 14" Sheave · 3/4" Wire · 5 US t Line Pull / J-566 · Oblong Swivel Eye | 775254 | $6,842.00 | 100.0 lb | ✓ In Stock | ||
| 14" Sheave · 1" Wire · 10 US t Line Pull / E-566 · Drilled Swivel Eye | 775067 | $6,407.00 | 100.0 lb | ✓ In Stock | ||
| 14" Sheave · 1" Wire · 10 US t Line Pull / J-566 · Oblong Swivel Eye | 775263 | $6,842.00 | 100.0 lb | ✓ In Stock | ||
| 16" Sheave · 3/4" Wire · 10 US t Line Pull / J-566 · Oblong Swivel Eye | 776672 | $10,467.00 | 130.0 lb | ✓ In Stock | ||
| 16" Sheave · 1" Wire · 10 US t Line Pull / E-566 · Drilled Swivel Eye | 752956 | $9,803.00 | 130.0 lb | ✓ In Stock | ||
| 16" Sheave · 1" Wire · 10 US t Line Pull / J-566 · Oblong Swivel Eye | 752965 | $10,467.00 | 130.0 lb | ✓ In Stock |
Weights are approximate shipping weights.
Bulk order? Email sales@slingcenter.com with your list — we'll build a single quote.
Chat with our AI rigging specialist
Fastest: click the Ask SlingCenter chat widget in the bottom-right of any page. Our AI specialist is available 24/7 and trained on ASME B30.9, B30.26, OSHA rigging standards, and our full catalog. It can help you size a sling, pick the right shackle, explain inspection criteria, and look up your order.
Prefer to email?
Send to: sales@slingcenter.com
Include:
- What you are lifting (shape, material, fragility)
- Load weight (lb)
- Length / reach needed
- Pick points — smooth lugs, sharp edges, or a hook?
- Environment — indoor, outdoor, heat, saltwater, chemicals?
- Quantity and timeline
- Your phone number if you want a callback
Response: AI chat instant. Email within 1 business day. Urgent orders same-day on standard configurations.
Why SlingCenter
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Enter your zip to see delivery estimates at checkout.
Go to Cart to Estimate
