Industry reference
Design factors: what the rating on the tag means
A design factor is the ratio between a product’s minimum breaking strength and its rated working load: a 3:1 strap breaks at no less than three times its rating. Each product type carries its own factor, set by the standard that governs it — so compare ratings only between products rated the same way.
| Product type | Design factor | Standard |
| Pro-Edge® web slings | 5:1 | WSTDA-WS-1, ASME B30.9 |
| RoundUp™ roundslings | 5:1 | WSTDA-RS-1, ASME B30.9 |
| PAC-Flex™ & PAC-Link® chain slings | 4:1 | ASME B30.9 |
| Ratchet assemblies & tie downs | 3:1 | WSTDA-T-1 |
| Tow straps | 3:1 typical (some 2:1) | No single governing standard |
| Kinetic recovery ropes | No working load — sized by breaking strength | Bubba Rope: minimum breaking strength 3–4× the stuck vehicle’s weight |
Design factors from the Liftex sling production chart. Made-to-length tolerance on 1–2 ply web: ±1″ or 2%, whichever is greater.
Liftex quality
The most trusted name in slings since 1955
Liftex is a full-service sling fabricator — web slings, roundslings, chain slings, wire rope slings, cargo control and vehicle recovery products — built with maximum focus on safety, quality, performance and integrity.
- WSTDA-T-1 — Recommended Standard for Synthetic Web Tie Downs
- WSTDA-WS-1 — Recommended Standard Specifications for Synthetic Web Slings
- WSTDA-RS-1 — Recommended Standard for Synthetic Polyester Roundslings
- ASME B30.9 — Slings
- OSHA 29 CFR 1910.184 — Slings
- Formal training from the manufacturer or an outside provider